Create, add files to, or extract files from an archive file in gnutar format, called a tarfile. Tape ARchiver; manipulate "tar" archive files.
Syntax
tar [bundled-flags args] [file | pattern ...]
tar {-c} [options] [files | directories]
tar {-r | -u} -f archive-file [options] [files | directories]
tar {-t | -x} [options] [patterns]
tar creates and manipulates streaming archive files.
This implementation can extract from tar, pax, cpio, zip, jar, ar, and ISO 9660 cdrom images
and can create tar, pax, cpio, ar, and shar archives.
The first synopsis form shows a 'bundled' option word. This usage is provided for compatibility with historical implementations. See COMPATIBILITY below for details.
The other synopsis forms show the preferred usage.
The first option to tar is a mode indicator from the following list:
-c Create a new archive containing the specified items.
-r Like -c, but new entries are appended to the archive.
Note that this only works on uncompressed archives stored in regular files. The -f option is required.
-t List archive contents to stdout.
-u Like -r, but new entries are added only if they have a modification date newer
than the corresponding entry in the archive. Note that this
only works on uncompressed archives stored in regular files. The -f option is required.
-x Extract to disk from the archive. If a file with the same name appears more than once in the
archive, each copy will be extracted, with later copies overwriting (replacing) earlier copies.
In -c, -r, or -u mode, each specified file or directory is added to the archive in the order specified
on the command line. By default, the contents of each directory are also archived.
In extract or list mode, the entire command line is read and parsed before the archive is opened.
The pathnames or patterns on the command line indicate which items in the archive should be processed.
Patterns are shell-style globbing patterns as documented in tcsh(1).
Options
Unless specifically stated otherwise, options are applicable in all operating modes.
@archive
(c and r mode only) The specified archive is opened and the entries in it will be appended
to the current archive. As a simple example,
tar -c -f - newfile @original.tar
writes a new archive to standard output containing a file newfile and all of the entries
from original.tar. In contrast,
tar -c -f - newfile original.tar
creates a new archive with only two entries. Similarly,
tar -czf - --format pax @-
reads an archive from standard input (whose format will be determined automatically) and
converts it into a gzip-compressed pax-format archive on stdout.
In this way, tar can be used to convert archives from one format to another.
-b blocksize
Specify the block size, in 512-byte records, for tape drive I/O.
As a rule, this argument is only needed when reading from or writing to tape drives, and
usually not even then as the default block size of 20 records (10240 bytes) is very common.
-C directory
In c and r mode, this changes the directory before adding the following files.
In x mode, change directories after opening the archive but before extracting entries from the archive.
--check-links
(c and r modes only) Issue a warning message unless all links to each file are archived.
--chroot
(x mode only) chroot() to the current directory after processing any -C options
and before extracting any files.
--exclude pattern
Do not process files or directories that match the specified pattern.
Note that exclusions take precedence over patterns or filenames
specified on the command line.
--format format
(c, r, u mode only) Use the specified format for the created archive.
Supported formats include 'cpio', 'pax', 'shar', and 'ustar'. Other formats may also be supported;
see libarchive-formats(5) for more information about currently-supported formats.
In r and u modes, when extending an existing archive, the format specified here must be compatible
with the format of the existing archive on disk.
-f file
Read the archive from or write the archive to the specified file.
The filename can be - for standard input or standard output.
-H (c and r mode only) Symbolic links named on the command line will be followed;
the target of the link will be archived, not the link itself.
-h (c and r mode only) Synonym for -L.
-I Synonym for -T.
--include pattern
Process only files or directories that match the specified pattern.
Note that exclusions specified with --exclude take precedence over inclusions.
If no inclusions are explicitly specified, all entries are processed by default.
The --include option is especially useful when filtering archives. For example, the command
tar -c -f new.tar --include='*foo*' @old.tgz
creates a new archive new.tar containing only the entries from old.tgz containing the string 'foo'.
-j (c mode only) Compress the resulting archive with bzip2(1).
In extract or list modes, this option is ignored. Note that, unlike other tar
implementations, this implementation recognizes bzip2 compression automatically when reading archives.
-k (x mode only) Do not overwrite existing files. In particular, if a file appears more than once
in an archive, later copies will not overwrite earlier copies.
--keep-newer-files
(x mode only) Do not overwrite existing files that are newer than the versions
appearing in the archive being extracted.
-L (c and r mode only) All symbolic links will be followed.
Normally, symbolic links are archived as such.
With this option, the target of the link will be archived instead.
-l This is a synonym for the --check-links option.
-m (x mode only) Do not extract modification time.
By default, the modification time is set to the time stored in the archive.
-n (c, r, u modes only) Do not recursively archive the contents of directories.
--newer date
(c, r, u modes only) Only include files and directories newer than the specified date.
This compares ctime entries.
--newer-mtime date
(c, r, u modes only) Like --newer, except it compares mtime entries instead of ctime entries.
--newer-than file
(c, r, u modes only) Only include files and directories newer than the specified file.
This compares ctime entries.
--newer-mtime-than file
(c, r, u modes only) Like --newer-than, except it compares mtime entries instead of ctime entries.
--nodump
(c and r modes only) Honor the nodump file flag by skipping this file.
--null (use with -I, -T, or -X) Filenames or patterns are separated by null characters, not by newlines.
This is often used to read filenames output by the -print0 option to find(1).
--numeric-owner
(x mode only) Ignore symbolic user and group names when restoring archives to disk, only
numeric uid and gid values will be obeyed.
-O (x, t modes only) In extract (-x) mode, files will be written to standard out rather than
being extracted to disk. In list (-t) mode, the file listing will be written to stderr rather than the usual stdout.
-o (x mode) Use the user and group of the user running the program rather than those specified
in the archive. Note that this has no significance unless -p is specified, and the program
is being run by the root user. In this case, the file modes and flags from the archive will
be restored, but ACLs or owner information in the archive will be discarded.
-o (c, r, u mode) A synonym for --format ustar
--one-file-system
(c, r, and u modes) Do not cross mount points.
--options options
Select optional behaviors for particular modules.
The argument is a text string containing comma-separated keywords and values.
These are passed to the modules that handle particular formats to control how those formats will behave.
Each option has one of the following forms:
key=value
The key will be set to the specified value in every module that supports it.
Modules that do not support this key will ignore it.
key The key will be enabled in every module that supports it. This is equivalent to key=1.
!key The key will be disabled in every module that supports it.
module:key=value, module:key, module:!key
As above, but the corresponding key and value will be provided only to modules whose name matches module.
The currently supported modules and keys are:
iso9660:joliet
Support Joliet extensions. This is enabled by default, use !joliet or iso9660:!joliet to disable.
iso9660:rockridge
Support Rock Ridge extensions. This is enabled by default, use !rockridge or iso9660:!rockridge to disable.
gzip:compression-level
A decimal integer from 0 to 9 specifying the gzip compression level.
xz:compression-level
A decimal integer from 0 to 9 specifying the xz compression level.
mtree:keyword
The mtree writer module allows you to specify which mtree keywords will be included in the output. Supported keywords include:
cksum, device, flags, gid, gname, indent, link, md5, mode, nlink, rmd160, sha1, sha256, sha384, sha512, size, time, uid, uname.
The default is equivalent to: 'device, flags, gid, gname, link, mode, nlink, size, time, type, uid, uname'.
mtree:all
Enables all of the above keywords. You can also use mtree:!all to disable all keywords.
mtree:use-set
Enable generation of /set lines in the output.
mtree:indent
Produce human-readable output by indenting options and splitting lines to fit into 80 columns.
zip:compression=type
Use type as compression method. Supported values are store (uncompressed) and deflate (gzip algorithm).
If a provided option is not supported by any module, that is a fatal error.
-P Preserve pathnames.
By default, absolute pathnames (those that begin with a / character) have the leading slash
removed both when creating archives and extracting from them. Also, tar will refuse to extract
archive entries whose pathnames contain .. or whose target directory would be altered by a symlink.
This option suppresses these behaviors.
-p (x mode only) Preserve file permissions.
Attempt to restore the full permissions, including owner, file modes, file flags and ACLs, if available,
for each item extracted from the archive. By default, newly-created files are owned by the user
running tar, the file mode is restored for newly-created regular files, and all other types of entries
receive default permissions. If tar is being run by root, the default is to restore the owner unless
the -o option is also specified.
-q (--fast-read)
(x and t mode only) Extract or list only the first archive entry that matches each pattern or filename operand.
Exit as soon as each specified pattern or filename has been matched.
By default, the archive is always read to the very end, since there can be multiple entries
with the same name and, by convention, later entries overwrite earlier entries.
This option is provided as a performance optimization.
-S (x mode only) Extract files as sparse files.
For every block on disk, check first if it contains only NULL bytes and seek over it otherwise.
This works similiar to the conv=sparse option of dd.
--strip-components count
(x mode only) Remove the specified number of leading path elements.
Pathnames with fewer elements will be silently skipped. Note that the pathname is edited after
checking inclusion/exclusion patterns but before security checks.
-s pattern
Modify file or archive member names according to pattern.
The pattern has the format /old/new/[gps] where old is a basic regular expression, new is the
replacement string of the matched part, and the optional trailing letters modify how the
replacement is handled. If old is not matched, the pattern is skipped.
Within new, ~ is substituted with the match, 1 to 9 with the content of the corresponding
captured group. The optional trailing g specifies that matching should continue after
the matched part and stopped on the first unmatched pattern.
The optional trailing s specifies that the pattern applies to the value of symbolic links.
The optional trailing p specifies that after a successful substitution the original path
name and the new path name should be printed to standard error.
-T filename
In x or t mode, tar will read the list of names to be extracted from filename.
In c mode, tar will read names to be archived from filename.
The special name '-C' on a line by itself will cause the current directory to be
changed to the directory specified on the following line.
Names are terminated by newlines unless --null is specified.
Note that --null also disables the special handling of lines containing '-C'.
-U (x mode only) Unlink files before creating them.
Without this option, tar overwrites existing files, which preserves existing hardlinks.
With this option, existing hardlinks will be broken, as will any symlink that would affect
the location of an extracted file.
--use-compress-program program
Pipe the input (in x or t mode) or the output (in c mode) through program instead of
using the builtin compression support.
-v Produce verbose output. In create and extract modes, tar will list each file name as
it is read from or written to the archive.
In list mode, tar will produce output similar to that of ls(1).
Additional -v options will provide additional detail.
--version
Print version of tar and libarchive, and exit.
-w Ask for confirmation for every action.
-X filename
Read a list of exclusion patterns from the specified file.
See --exclude for more information about the handling of exclusions.
-y (c mode only) Compress the resulting archive with bzip2(1).
In extract or list modes, this option is ignored. Note that, unlike other tar implementations,
this implementation recognizes bzip2 compression automatically when reading archives.
-z (c mode only) Compress the resulting archive with gzip(1).
In extract or list modes, this option is ignored. Note that, unlike other tar implementations,
this implementation recognizes gzip compression automatically when reading archives.
-Z (c mode only) Compress the resulting archive with compress(1).
In extract or list modes, this option is ignored. Note that, unlike other tar implementations,
this implementation recognizes compress compression automatically when reading archives.
The following environment variables affect the execution of tar:
LANG The locale to use. See environ(7) for more information.
TZ The timezone to use when displaying dates. See environ(7) for more information.
The tar utility exits 0 on success, and >0 if an error occurs.
To tar and zip a file
tar -czvf MyArchive.tgz Source_file or in full tar --create --gzip --verbose --file=MyArchive.tgz Source_file
To view a detailed table of contents for this archive:
tar -tvf MyArchive.tgz
To tar a folder (with all sub-folders and files)
tar czf /volumes/myexternaldrive/backup01.tgz myfolder
The reverse process to extract the file
tar -xzvf MyArchive.tgz Destination_file or tar --extract --gunzip --verbose --file=MyArchive.tgz Destination_file tar xzvf /volumes/myexternaldrive/backup01.tgz myfolder/subfolder/thefiletorestore
Extract a file, autodetecting the format, in this case an xz archive:
tar -xf some.tar.xz
To extract all the C sources and headers from an archive named backup.tar:
tar xf backup.tar '*.[ch]'
Note that the pattern must be quoted to prevent the shell from attempting to expand it according the files in the current working directory (the
shell does not have access to the list of files in the archive, of course).
To move file hierarchies, use a command line like this:
tar -cf - -C srcdir . | tar xpf - -C destdir
To create a compressed archive on diskette, using gzip(1), use a command-line like:
tar --block-compress -z -c -v -f /dev/fd1a -b 36 tar/
Note that you cannot mix bundled flags and --style flags; you can use single-letter flags in the manner above, rather than having to type tar --block-compress --gzip --verbose --file /dev/fd1a --block-size 20 tar/
The above-created diskette can be listed with
tar tvfbz /dev/fd1a 36
To join two gnutar archives into a single archive, use
tar Af archive1.tar archive2.tar
which will add the files contained in archive2.tar onto the end of
archive1.tar (note that this can’t be done by typing:
cat archive2.tar >> archive1.tar
because of the end-of-file block at the end of a gnutar archive).
To archive all files from the directory srcdir, which were modified after
Feb. 9th 1997, 13:00 h, use
tar -c -f backup.tar --newer-mtime 'Feb 9 13:15 1997' srcdir/ Other possible time specifications are `02/09/97 13:15', `1997-02-09 13:15', `13:15 9 Feb 1997', `9 Feb 1997 13:15', `Feb. 9, 1997 1:15pm', `09-Feb', `3 weeks ago' or `May first Sunday'. To specify the correct time zone use either e.g. `13:15 CEST' or `13:15+200'.
Always tar -t before tar -x to check if the archive contents have been placed inside one subdirectory or will just spill all over the current directory.
The -C feature does not work like historical gnutar programs, and is probably untrustworthy.
The -A command should work to join an arbitrary number of gnutar archives together, but it does not; attempting to do so leaves the end-of-archive blocks in place for the second and subsequent archives.
The gnutar file format is a semi fixed width field format, and the field for device numbers were designed for 16 bit (8 major, 8 minor) and can not absorb our 32 bit (8 major, 16+8 minor) numbers.
POSIXLY_CORRECT Normally, gnutar will process flag arguments that appear
in the file list. If set in the environment, this
causes gnutar to consider the first non-flag argument to
terminate flag processing, as per the POSIX specification.
SHELL In interactive mode, a permissible response to the
prompt is to request to spawn a subshell, which will be
/bin/sh unless the SHELL variable is set.
SIMPLE_BACKUP_SUFFIX
Sets the backup suffix used by gnutar. Default is '~'.
TAPE Changes gnutar’s default tape drive /dev/sa0 (which is still
overridden by the -f flag).
TAR_OPTIONS The environment variable TAR_OPTIONS can hold a set of
default options for gnutar. These options are inter-
preted first and can be overwritten by explicit command
line parameters.
TAR_RSH The TAR_RSH environment variable allows you to override
the default shell used as the transport for gnutar.
VERSION_CONTROL Sets the backup method used by gnutar. Possible values:
t, numbered Make numbered backups
nil, existing Numbered if numbered backups exist,
simple otherwise
never, simple Always make simple backups
Default behaviour is 'existing'.
"To disarm the bomb simply enter a valid tar command on your first try. No Googling” ~ XKCD
Local man page: tar - Command line help page on your local machine.
bzip2(1)
cpio - Copy files to and from archives.
compress - compress and expand data.
gzip - Compress or decompress files.
pax(1)
rmt - remote magtape protocol module.
info tar
Equivalent Windows command: TAR - Store, list or extract files in an archive.